How to make full use of superior sound insulation performance ?

Many people think that the soundproof windows and doors are a simple decoration, but many people have more or less problems during the installation, resulting in re-disassembly and even re-purchase.

1. Install different soundproof glass on different floors

Depending on the environment, noise is divided into low frequency noise, medium frequency noise, and high frequency noise. Different floors and noise sources require specialized personnel (generally door and window enterprise technicians) to measure the noise level and the ability to withstand noise.

2, how to not damage the decoration and install soundproof windows and doors

If the owner has been renovated, he is not satisfied with the existing window insulation. With a free space on the window sill, you can add a soundproof door and window. This will not damage the original window cover and window sill, and most of the soundproof windows and doors can be specially designed by the professional after field observation, practical and aesthetic, and will not affect the existing window switch.

3. How to ensure the sealing of doors and windows

There should be styrofoam filling between the window frame and the wall, and the inside and outside of the window frame must be sealed with silicon copper glue or sealant to prevent water seepage. Remember, after installation, the user should remove the protective film, which can extend the life of the door and window.

4, the soundproof glass is not the number of layers as much as possible

Some families will install two double-glazed windows for the pursuit of sound insulation, but in fact, the insulating glass is not the more layers, the better, the middle of the hollow glass is a relatively dry air layer, easy to produce "resonance." Therefore, it has no mute effect on medium and low frequency noise. It is recommended to install professional soundproofing windows and doors on the inside of the window.

5, install the soundproof glass to change the window frame first

Soundproof windows and doors are a well-designed soundproof system. Just like the principle of wooden barrels, every design of glass, window frame and sealing strip is indispensable. If the doors and windows are replaced, the soundproof glass will be replaced directly without replacing the window frame. Without special design, the sound will still enter the room, and the soundproof windows and doors will not be achieved.

6. Will there be any smell after installing the system door and window?

The silicone rubber or sealant used for sealing the door and window is neutral and environmentally friendly. It is a healthy and green environmentally friendly colloid. As long as it is dry, there will be no odor and no harm to the human body.

7. Basic inspection after installation of soundproof windows and doors

After the doors and windows are installed, the basic acceptance work should be done:

Whether the form has scratches; whether the hardware is flexible and stable;

Whether the glass has scratches and degumming;

Whether the swinging of the casement window is smooth;

There should be aluminum slide rails at the bottom of the sliding window frame to facilitate replacement.

There should be a fixing piece in the middle of the sealing top of the sash, which is the key to the sealing performance of the sliding window.

8. What is the low controllable soundproof door and window?

This is a question that many people are curious about. In fact, the natural physical noise in our daily air is 30 decibels, and the noise below 30 decibels is not recognized by the detector. The indoor sound control is very comfortable and quiet at around 35 decibels.

More information about glass and mirror , please click ..........com