Follow us :

  • What is a one-way mirror ?A one-way see-through film (also called a one-way film, a mirror film, etc.) refers to a film that is attached to a glass to make the glass have a high reflectance to visible light. The one-way fluoroscopic film can realize that when the outdoor is brighter than the indoor, the one-way see-through glass is similar to the ordinary mirror, and the indoor scene can not be se...

  • How much is the tempered glass production line?The tempering equipment needs about 1 million-500wWhat type of tempering line, single room, double room, flat bend, a variety of, the main need to pay attention to: The size of the furnace, the general average of 2460 * 4000 or so, see your needs.Type, the price of a single room is cheap, the processing capacity of the double room is large, and the pr...

  • What is a single piece of cesium potassium fireproof glass ?The monolithic cesium-potassium fire-retardant glass is subjected to special chemical treatment for more than 20 hours of ion exchange at a high temperature, replacing the metal sodium on the surface of the glass to form a surface chemical tempering stress, and at the same time, a high-strength pressure is formed on the surface of the gla...

  • How to fix the lacquered glass on the wall ?There are two ways, one is glass glue fixed, if the glass is very large or the color is very light, it is fixed by expansion screws. The glass is very big, the strength of the glass glue will not be enough, can not bear the weight of the glass, there will be falling risk.Glass glue fixing method: evenly apply glass glue on the back of the glass to be fix...

  • Why is the insulating glass condensation?Insulating glass is widely used as a new energy-saving building material, heat insulation and sound insulation. At the same time, the quality requirements for insulating glass are getting higher and higher.During use of the insulating glass, when the ambient temperature is lowered to lower the surface temperature of the glass to the dew point in the dry air...

  • What is low-emissivity glass?Low-emissivity glass is a coated glass with a high reflectance (80% or more) for far-infrared rays with a wavelength range of 4.5 to 25 microns. It is a low-emissivity coating coated with a metal or metal oxide film on the surface of high-quality float glass, which makes it reflective to far-infrared rays, which can effectively block the heat flow of the high-temperatu...

  • What are the glass plank standards?According to the standard, the general layout of the glass suspension bridge should meet the planning requirements, and combined with local environmental characteristics, traffic conditions, people flow distribution direction and other factors, the bridge should be selected in areas with good environmental conditions, and should avoid the adverse areas of earthqu...

  • What is low reflection glass frosting powder? Low-reflection glass, also known as anti-reflective glass or non-reflective glass, anti-glare glass. It is a kind of glass that special treatment of glass surface. The principle is to treat high-quality glass with single-sided or double-sided frosting and polishing process. Compared with ordinary glass, it has a lower reflectance, which reduces the ref...

  • What is the Low e Optisolar D ?Low-E coated glass is one of the coated glass products withvarious metal or other compound depositions on the surface.It has different transmittance to visible light and higherreflectance against far Infrared. We provide single silver,double silver Low-E coated glass and related Compoundglass products with optimized performance for customersaccording to the actual de...

  • What is the structure of bulletproof glass?Bulletproof glass: Bulletproof glass refers to the glass with the ability to transmit light and transparency, and also has the ability to protect the shooting. The bulletproof principle of bulletproof glass is to convert the impact kinetic energy of the bullet into the elastic potential energy and debris of the glass. Surface energy. Bulletproof glass is ...

  • How to distinguish between insulating glass and three-layer duplex glass ?In contrast, the three-layer duplex glass is superior to the insulating glass. The three-layer duplex glass has excellent thermal insulation properties, and it is used as a window glass to make the winter room warm and the indoor heating is not easily lost, reducing heating and air conditioning. The cost of use saves energy....

  • What is the function of the atomized glass?Atomized glass can also be called dimming glass, which can be controlled by voltage control between the scattering state and the transmissive state. This change achieves the dual requirements of glass permeability and privacy protection. Glass is widely used in high-end offices, computer rooms, medical institutions, commercial displays and other fields.Th...

  • What is the Use of flat glass ? The glass is transparent and has stable performance. Various types have different characteristics depending on the application, and the scope of application is very wide. When we choose glass, in addition to paying attention to the price, we should also have a certain understanding of its type and performance, and learn from the shortcomings to find a more suitable ...

  • What is glass brick ?Glass brick is applied to the outer wall: it has the entity of the wall and the transparency of the window. More light, sound insulation and fire prevention are all available. Hollow glass bricks can be used for the outer bodies of large-scale office buildings and hotels.Glass bricks are used for partitions: glass brick walls are used to decorate the partitions, which can divi...

  • Is the glass on the plane bulletproof glass?The aircraft does not have to consider bulletproof at high altitude, but it has great resistance and high pressure. So it is very thick and strong. The glass on a passenger airliner is usually made up of materials such as plexiglass, inorganic silicate glass and transparent interlayer film. In order to simplify the process, it is usually made into a plan...

  • Is the glass on the plane bulletproof glass?The aircraft does not have to consider bulletproof at high altitude, but it has great resistance and high pressure. So it is very thick and strong. The glass on a passenger airliner is usually made up of materials such as plexiglass, inorganic silicate glass and transparent interlayer film. In order to simplify the process, it is usually made into a plan...

  • How to Enhance the Sound Insulation of Glass Windows ?Glass has been widely used in modern times and has always been a product with a large market demand. By using specific treatment methods, we can make full use of the characteristics of the glass, and can make up for its defects, no longer subject to the natural properties of the glass. For example, laminated glass can not only be insulated, but...

  • What is Cast Glass ? Cast glass, also known as crystal three-dimensional art glass, is a new family that has begun to appear in the decorative industry.With its unique decorative effect, hot-melt glass has become the focus of design units, glass processing owners, and decoration and decoration owners. The hot-melt glass spans the existing glass form, fully utilizing the artistic concept of the des...

  • What Is Glass ?Glass is our common building material. Generally,float glass is used for ordinary window glass. The main raw materials of float glass are soda ash, limestone and quartz sand, which are obtained by melting together sodium silicate, calcium silicate and silicon dioxide. When people produce ordinary glass, the raw materials are pulverized, mixed in an appropriate ratio, and then placed...

  • How to solve the wrinkles and visual defects of the film during the production of laminated glass?The film in laminated glass is pulled during cutting, and the film is retracted after cutting, causing some edges to have no film; the key to the processing is to ensure uniform and sufficient exhaust between the glass and PVB, if the rolling roller is not flat and heated Uniform, pre-pressed venting ...

  • What is heat strengthened glass ?Semi-tempered glass is also called heat strengthened glass. Semi-tempered glass is a kind of between ordinary flat glass and tempered glass. It has some advantages of tempered glass. For example, the strength is higher than that of ordinary float glass, which is twice that of ordinary float glass. At the same time, it avoids tempered glass. The flatness is poor, an...

  • What is heat soaked glass ?Heat soaking is a process that may expose NiS inclusions in tempered glass thereby reducing the risk of potential field cracking. The process involves placing the tempered glass inside a chamber and raising the temperature to approximately 290ºC to accelerate nickel sulfide expansion. This causes glass containing nickel sulfide inclusions to break in the heat soak chambe...

  • Is the insulating glass UV-resistant?Insulating glass protects against UV rays. A properly configured insulating glass and a reasonable thickness of the insulating glass spacer layer can reduce the transmission of energy through the radiation form to a large extent. High-performance insulating glass can intercept the considerable energy emitted by the sun into the room, thus preventing the discomf...

  • Is the glass staircase safe?Full glass staircase: The load-bearing parts of the stairs, such as steps, pillars and structural beams, and armrest fences are all made of glass, with only a few metal fixtures or no fixtures.Part of the glass staircase--- can be specifically divided into: steel-structured glass staircase (for structural pillars or beams, see metal structure + glass step surface + glas...

  • Why is there water vapor in the middle of the double glazing and how to solve this problem?The double glazing is composed of two or more pieces of glass sandwiched with aluminum spacers. The aluminum spacers are made of molecular sieves and the outer edges are sealed with a sealant. If it is not sealed at the time of manufacture, or if the molecular sieve is missing, the phenomenon of water vapor ...

  • What is the glass mirror that can only be seen from the inside out? Which glass mirror that can only be seen from the inside out? One-way see-through glass (single-sided mirror) can achieve this effect. Of course, this effect is only available during the day, and when it is turned on at night, this glass is no different from ordinary glass.One-way perspective glass principle: This kind of glass ha...

  • Do you know the opening requirements of tempered glass?Glass drilling machines are machines for glass drilling, discrete glass drilling machines and horizontal glass drilling machines. Here is a brief introduction to the opening requirements of tempered glass.1. Only tempered glass with a width greater than 8 times thickness can be drilled.2. For tempered glass with a thickness not exceeding 12 mm...

  • Can LOW-E glass be bent?Low-E glass, also known as low-emission glass, is a film-based product that is coated with multiple layers of metal or other compounds on the surface of the glass. The coating layer has high transmission of visible light and high reflection of mid-range infrared rays, and has excellent heat insulation effect and good light transmittance compared with ordinary glass and conv...

  • What is the difference between frameless glass door and aluminum alloy door?The frameless glass door is different from the aluminum alloy door in that it has no consolidated border around the door leaf (glass). Frameless glass doors are generally made of 8~12MM tempered glass, and the upper and lower sides are decorated with decorative frames or directly with clips. Ground springs need to be burie...

  • What are the functions of dimming glass?The smart glass is a liquid crystal film sandwiched between two layers of glass. The liquid crystal film is covered by the PVB film in the center, and then placed in an autoclave and glued through a high temperature and high pressure process. In addition to all the application characteristics of glass, smart dimming glass also has privacy protection.1, priva...

  • The difference between single silver, double silver and three silver Low-E glassFirst, the concept of Low-E glassLow-E glass, also known as Low Emissivity Glass, is a film-based product coated with multiple layers of metal or other compounds on the surface of the glass. The main functional layer of the Low-E film is the silver layer. Silver is one of the substances with low emissivity in nature. T...

  • What the Type of Ultra-Clear Glass ? One is ultra white solar rolled glass The ultra white solar rolled glass component can absorb the radiant heat of solar energy to the maximum extent and maximize the photoelectric conversion efficiency of the solar cell. The glass can also resist the radiation of the sun ultraviolet light, and the light transmittance does not decrease, so that the service life ...

  • What are the advantages of ultra-clear glass?Ultra-clear glass is an ultra-transparent low-iron glass, also known as low-iron glass and high-transparent glass. It is a new high-quality, multi-functional glass variety with a light transmittance of over 91.5%.Ultra-clear glass combines all the processing properties of high-quality float glass with superior physical, mechanical and optical properties...

  • How to Prevent Leakage and Water Seepage of Glass Curtain Wall ?There are three basic conditions for the curtain wall fittings expert analysis that cause water seepage and water leakage in the curtain wall: there are pores; there is water; there is a pressure difference of seepage cracks. Therefore, the countermeasures are as follows: one is to minimize the pores; the other is to block the rainwat...

  • What are the Types of Glass Doors ?Introduction to the characteristics of glass doorsFirst, decorative glass doorIncluding frosted glass, embossed glass, engraved glass, glazed glass, sprayed glass, ice glass, emulsified glass, etc., mainly in the production of different patterns. Different colors, good gloss effect, excellent decorative effect, corrosion resistance, easy to clean, anti-scour and ...

  • What is the difference between PVB laminated glass and SGP laminated glass ?Early laminated glass was generally made of laminated glass produced by PVB film; since PVB film was originally developed for automotive glass rather than for the building curtain wall industry, it has been used for many years in the construction industry, has a wide range of uses and achieved good safety results. However...

  • How to clean the glass curtain wall ? The glass is made of quartz sand and alkali as raw materials. After melting and cooling, the viscosity is continuously increased to form a continuous three-dimensional network. Each cation in the structure is surrounded by a certain number of coordination oxygen ions. The cation has a large field strength, exhibiting an equilibrium state inside the glass, and ...

  • How to choose the color of the Low-e glass ?LOW-E glass, also known as low-emissivity glass, is an energy-saving glass. Due to its superior energy-saving and colorful colors, it is a beautiful landscape in public buildings and high-end residences. Common LOW-E glass colors are blue, gray, colorless, etc. These mainstream colors are durable and look like the mainstream color of urban architecture, ...

  • What are the advantages of tempered glass?The first is that the strength is several times higher than that of ordinary glass and it is resistant to bending.The second is safe use, and its load-bearing capacity is improved to improve the fragile nature. Even if the tempered glass is broken, it is a small piece with no sharp angle, and the damage to the human body is greatly reduced. The quenching a...

  • What is the heat absorbing glass?The endothermic glass is a flat glass that absorbs a large amount of infrared radiant energy and maintains a high visible light transmittance. There are two ways to produce endothermic glass: one is to add a certain amount of colorant with endothermic properties to the raw material of ordinary soda lime silicate glass; the other is to spray one or more layers on th...